PRUITT HEALTH -MACON

Observed items within walk in cooler above 41F. Unit temperature was 39F, unit most likely was left opened.

511-6-1.04(6)(f) - Time/Temperature Control for Safety; Cold Holding (P) (f) Time/Temperature Control for Safety Food, Hot and Cold Holding. Except during preparation, cooking, or cooling, or when time is used as the public health control, time/temperature control for safety food shall be maintained at 41°F (5°C) or below or 135°F (57°C) or above, except that roasts cooked to a temperature and for a time specified in subsection (5)(a)2 of this Rule and reheated using the same temperature and time conditions as cooking may be held at a temperature of 130°F (54°C) or above. P

Corrective action: Advised PIC to maintain door to walk in cooler closed to cool down food to below 41F. As well as to have unit checked if it requires maintenance.

Observed three compartment sink and prep sink at temperatures below 110F

511-6-1.06(1)(g),(h) - Water Supply, Capacity; Pressure (Pf) (g) Capacity.

1. The water source and system shall be of sufficient capacity to meet the peak water demands of the food service establishment. Pf

2. Hot water generation and distribution systems shall be sufficient to meet the peak hot water demands throughout the food service establishment. Pf (h) Pressure. Water under pressure shall be provided to all fixtures, equipment, and nonfood equipment that are required to use water except that water supplied as specified under subsection (1)(k)1 and 2 to a temporary food service operation or in response to a temporary interruption of a water supply need not be under pressure. Pf

Corrective action: Discussed with PIC to elevate temperature of water heater for sinks to reach 110F or above. Technician arrived during inspection.

Observed warewashing machine not reaching 120F as required within data plate after three washes.

511-6-1.05(6)(h),(i) - Warewashing Equipment, Clean Solutions; Manual Warewashing Equipment, Wash Solution Temperature (C,Pf) (h) Warewashing Equipment, Clean Solutions. The wash, rinse, and sanitize solutions shall be kept clean.

(i) Manual Warewashing Equipment, Wash Solution Temperature. The temperature of the wash solution in manual warewashing equipment shall be maintained at not less than 110°F (43°C) or the temperature specified on the cleaning agent manufacturer's label instructions. Pf

Corrective action: Discussed with PIC, to have temperature adjusted to reach required temperature. Technician arrived at time of inspection.

Observed Milk jugs within walk in cooler at 44F.

511-6-1.04(6)(f) - Time/Temperature Control for Safety; Hot Holding (P) (f) Time/Temperature Control for Safety Food, Hot and Cold Holding. Except during preparation, cooking, or cooling, or when time is used as the public health control, time/temperature control for safety food shall be maintained at 41°F (5°C) or below or 135°F (57°C) or above, except that roasts cooked to a temperature and for a time specified in subsection (5)(a)2 of this Rule and reheated using the same temperature and time conditions as cooking may be held at a temperature of 130°F (54°C) or above. P

Corrective action: Discarded milk and moved other perishable foods within cooler that were at temperature to reach in cooler. Recommend having unit serviced and possibly temperature reduced to compensate for workload.

Observed no hot water in facility.

511-6-1.06(1)(g),(h) - Water Supply, Capacity; Pressure (Pf) (g) Capacity.

1. The water source and system shall be of sufficient capacity to meet the peak water demands of the food service establishment. Pf

2. Hot water generation and distribution systems shall be sufficient to meet the peak hot water demands throughout the food service establishment. Pf (h) Pressure. Water under pressure shall be provided to all fixtures, equipment, and nonfood equipment that are required to use water except that water supplied as specified under subsection (1)(k)1 and 2 to a temporary food service operation or in response to a temporary interruption of a water supply need not be under pressure. Pf

Corrective action: Management is currently quoting for a new water heater and employees are boiling water. Temperature of boiled water 201F

Observed posted inspection report from 2022.

511-6-1.02(1)(d) - Displaying of the Inspection Report (C)

1. The most current inspection report shall be prominently displayed in public view at all times, within fifteen feet of the front or primary public door and between five feet and seven feet from the floor and in an area where it can be read at a distance of one foot away.

2. Food service establishments with drive-thru windows will post the current inspection report, and also have the inspection report posted so that a minimum of the top one-third of a copy of the current inspection report is visible through each window allowing customers to easily read the score, date of inspection and establishment information.

Corrective action: Spoke with PIC to have the most recent inspection report displayed to the public.

3. At food service establishments with no primary or public door, the current inspection report shall be prominently displayed at all times where the documents can be read by the public from a distance of one foot away. If requirements of this paragraph are not possible because of physical restrictions, a location will be determined as approved by the Health Authority.

4. The most current inspection report for mobile food service units and extended food service units issued by the local Health Authority having jurisdiction for its inspections shall be prominently displayed in public view during all hours of operation. Such inspection reports shall be prominently displayed at the point of service where the documents can be read by the public from a distance of one foot away.

5. A food service establishment inspection report addendum need not be displayed, but shall be made available by the food service establishment to the public upon request.

Observed gap at the bottom of the walk in cooler open allowing for air to escape equipment.

511-6-1.05(6)(a) - Good Repair & Proper Adjustment (C) (6) Maintenance and Operation.

(a) Good Repair and Proper Adjustment.

1. Equipment shall be maintained in a state of repair and condition that meets the requirements specified under subsections (1) and (2)of this Rule.

2. Equipment components such as doors, seals, hinges, fasteners, and kick plates shall be kept intact, tight, and adjusted in accordance with manufacturer's specifications.

3. Cutting or piercing parts of can openers shall be kept sharp to minimize the creation of metal fragments that can contaminate food when the container is opened.

Corrective action: Spoke with PIC to have walk in cooler gap repaired as soon as possible.

EHS observed drinks being prepped for lunch without covers stored on table exposed to contamination. (iv) Except as specified under paragraph 2. of this subsection and when cooling as specified in DPH Rule 511-6-1-.04(6)(e)2.(ii), storing the food in packages, covered containers, or wrappings, except for loosely covered or uncovered containers in which food is being cooled if protected from overhead contamination; PIC covered drinks. This was COS.

EHS observed boxes stored in freezer on a container of ice. PIC informed EHS that its there for storage.

(iii) At least 6 inches (15 cm) above the floor. Instructed PIC to have boxes stored on pallets and at least 6 inches off the ground. This must be corrected by 10/23/24

Observed coffee cup at the steam table station; coke bottle in REF alongside facility items. EHS informed PIC of the need to keep employee belongings separate from facility items and in a designated area.