Oct 17, 2025
Followup
11D - thermometers provided and accurate
CA: 1. In a mechanically refrigerated or hot food storage unit, the sensor of a temperature measuring device shall be located to measure the air temperature in the warmest part of a mechanically refrigerated unit and in the coolest part of a hot food storage unit. 2. Except as specified in paragraph 3 of this subsection, cold or hot holding equipment used for time/temperature control for safety food shall be designed to include and shall be equipped with at least one integral or permanently affixed temperature measuring device that is located to allow easy viewing of the device's temperature display. OBSERVATION: No thermometer is provided in the make line cooler. Discussed with the PIC that a working thermometer must remain in the the make line cooler.
18 - insects, rodents, and animals not present
Regulation: 511-6-1.07(2)(m) - outer openings protected (c)
CA: Except as specified in paragraphs 2 through 5 of this subsection, outer openings of a food service establishment shall be protected against the entry of insects and rodents by: Solid, self-closing, tight-fitting doors Observation: Observed visible light on bottom area of back exit door that opens to outside. PIC was instructed to have corrected by 10/13/2025.
13A - posted: permit/inspection/choking poster/handwashing
Regulation: 511-6-1.02(1)(d) - displaying of the inspection report (c)
CA: The most current inspection report shall be prominently displayed in public view at all times, within fifteen feet of the front or primary public door and between five feet and seven feet from the floor and in an area where it can be read at a distance of one foot away.
Observation: Most recent inspection report was observed not posted for public view, the report from 9-18-25 was posted.