South City Kitchen Avalon

Observed several TCS foods stored above 41F. PIC will have the 2 cooler fixed ASAP and moved the existing TcS foods to other cooler to cool them down. 511-6-1.04(6)(f) - Time/Temperature Control for Safety; Cold Holding (P) (f) Time/Temperature Control for Safety Food, Hot and Cold Holding. Except during preparation, cooking, or cooling, or when time is used as the public health control, time/temperature control for safety food shall be maintained at 41°F (5°C) or below or 135°F (57°C) or above, except that roasts cooked to a temperature and for a time specified in subsection (5)(a)2 of this Rule and reheated using the same temperature and time conditions as cooking may be held at a temperature of 130°F (54°C) or above. P

Observed beverage dispenser nozzles had a mold like black slime when swabbed. PIC cleaned the nozzles and was advised to clean food contact surfaces every 24 hours. 511-6-1.05(7)(a)1 - Equipment, Food-Contact Surfaces,& Utensils (Pf) (7) Cleaning of Equipment and Utensils.

(a) Equipment, Food-Contact Surfaces, and Utensils.

1. Equipment food-contact surfaces and utensils shall be clean to sight and touch. Pf.

Observed cooked rabbit that was date marked 11/02/24 in the walk in fridge next to the dish pit area.

1. A food that requires datemarking shall be discarded if it:

(i) Exceeds 7 days, not including the time that the product is frozen; P

(ii) Is in a container or package that does not bear a date or day; P or

(iii) Is appropriately marked with a date or day that exceeds 7 days . P

2. Refrigerated, ready-to-eat, time / temperature control for safety food prepared in a food service establishment and dispensed through a vending machine with an automatic shutoff control shall be discarded if it exceeds 7 days. P PIC voluntarily discarded the rabbit.

Observed that the dishwasher for the kitchen had a broken gauge. EHS tested the dishwasher to ensure that it reaches at least 160 F.

A warewashing machine shall be equipped with a temperature measuring device that indicates the temperature of the water:

1. In each wash and rinse tank; Pf and

2. As the water enters the hot water sanitizing final rinse manifold or in the chemical sanitizing solution tank. Pf

PIC will contact heir vendor to service the dishwasher.

Observed hot water sanitizing dishmachine final rinse not reaching proper temperature at manifold (Final Rinse: 162F). CA/COS: Advised PIC to utilize three compartment sink to properly sanitize dishes. PIC stated that a new dish machine has been ordered.

1. Except as specified in paragraph 2 of this subsection, in a mechanical operation, the temperature of the fresh hot water sanitizing rinse as it enters the manifold may not be more than 194ºF (90ºC), or less than: Pf (i) For a stationary rack, single temperature machine, 165ºF (74ºC); Pf or (ii) For all other machines, 180ºF (82ºC). Pf