California Pizza Kitchen

Observed employee water bottle in RIC in main kitchen. CA advised PIC that employee must have all drinks in designated area. Employees shall consume food only in approved designated areas separate from food preparation and serving areas, equipment or utensil areas and food storage areas. However, drinking from a single service beverage cup with a secure lid and straw that is handled to prevent contamination of the employee’s hands, the container, exposed food, clean equipment, utensils and linens, unwrapped single-service and single-use articles will be allowed.

Observed black build up on soda gun machine in bar. CA advised PIC to clean soda guns thoroughly and regularly. Equipment food-contact surfaces and utensils shall be clean to sight and touch.

Observed several TCS foods with internal temps above 41 F. (CA) Advised the PIC that TCS foods must be held at 41F or lower. Except during preparation, cooking, or cooling, or when time is used as the public health control, time/temperature control for safety food shall be maintained at 41°F (5°C) or below

Observed the ceilings in dish area needed cleaning and repair. (CA) Advised the PIC that the ceilings need cleaning and repair. Except as specified under subsection (2)(d) of this Rule and except for antislip floor coverings or applications that may be used for safety reasons, floors, floor coverings, walls, wall coverings, and ceilings shall be designed, constructed, and installed so they are smooth and easily cleanable.

Observed a few chemical bottles not labeled with the common name. COS- bottles were labeled. 511-6-1.07(6)(b) - Working Containers, Common Name (Pf) (b) Working Containers, Common Name. Working containers used for storing poisonous or toxic materials such as cleaners and sanitizers taken from bulk supplies shall be clearly and individually identified with the common name of the material. Pf

Observed food cooling in a cooler at an ambient temperature of 50 degrees. Cos- food was removed from cooler. 511-6-1.04(6)(e) - Cooling Methods (Pf, C) (e) Cooling Methods.

1. Cooling shall be accomplished in accordance with the time and temperature criteria specified under DPH Rule 511-6-1-.04(6)(d) by using one or more of the following methods depending on the type of food being cooled:

(i) Placing the food in shallow pans; Pf

(ii) Separating the food into smaller or thinner portions; Pf

(iii) Using rapid cooling equipment; Pf

(iv) Stirring the food in a container placed in an ice water bath; Pf

(v) Using containers that facilitate heat transfer; Pf

(vi) Adding ice as an ingredient; Pf or

(vii) Other effective methods. Pf

2. When placed in cooling or cold holding equipment, food containers in which food is being cooled shall be:

(i) Arranged in the equipment to provide maximum heat transfer through the container walls; and

(ii) Loosely covered, or uncovered if protected from overhead contamination during the cooling period to facilitate heat transfer from the surface of the food.

Observed multiple cutting boards stained and with gashes. CA- cutting boards shall be resurfaced or replaced. 511-6-1.05(6)(b) - Cutting Surfaces (C) (b) Cutting Surfaces. Surfaces such as cutting blocks and boards that are subject to scratching and scoring shall be resurfaced if they can no longer be effectively cleaned and sanitized, or discarded if they cannot be resurfaced.

Observed no temperature indicator for the high temperature dish machine. CA- indicator shall be provided. 511-6-1.05(3)(h),(i) - Temperature Measuring Device, Manual Warewashing; Sanitizing Solutions, Testing Device (Pf) (h) Temperature Measuring Devices, Manual and Mechanical Warewashing.

1. In manual warewashing operations, a temperature measuring device shall be provided and readily accessible for frequently measuring the washing and sanitizing temperatures. Pf

2. In hot water mechanical warewashing operations, an irreversible registering temperature indicator shall be provided and readily accessible for measuring the utensil surface temperature. Pf

Observed debris inside coolers and gaskets. Observed splatter on walls in the main kitchen, and observed rusted shelves in the RIC. CA- nonfood contact surfaces shall be kept clean. 511-6-1.05(7)(a)2,3 - Equipment, Food/Nonfood-Contact Surfaces, and Utensils, food-contact surfaces of cooking equipment & nonfood-contact surfaces free of accumulations (C) 2. The food-contact surfaces of cooking equipment and pans shall be kept free of encrusted grease deposits and other soil accumulations.

3. Nonfood-contact surfaces of equipment shall be kept free of an accumulation of dust, dirt, food residue, and other debris.

During the time of the inspection observed an employee washing a wiping cloth inside of the hand sink located at the front of the kitchen Code:A handwashing facility may not be used for purposes other than handwashing. Pf CA: Advised PIC to only use hand sink for hand washing

During time of the inspection observed food being stored uncovered in several reach in coolers inside of the kitchen. code: Except as specified under paragraph 2. of this subsection and when cooling as specified in DPH Rule 511-6-1-.04(6)(e)2.(ii), storing the food in packages, covered containers, or wrappings, except for loosely covered or uncovered containers in which food is being cooled if protected from overhead contamination; COS: PIC covered all food items

At the time of the routine inspection, observed (pink like substance) on the ice machine baffle. code:Ensurefood contact surfaces are cleaned and sanitized as required. CA: Advised the PIC to clean and sanitize the ice machine baffle.

During the time of the inspection observed packaged fish being thawed inside of commercial rop packing ( store bought). code:Thawing. Except as specified in paragraph 4 of this subsection, time/temperature control for safety food shall be thawed:

1. Under refrigeration that maintains the food temperature at 41°F (5°C) or less; or
2. Completely submerged under running water: (i) At a water temperature of 70°F (21°C) or below, (ii) With sufficient water velocity to agitate and float off loose particles in an overflow, and (iii) For a period of time that does not allow thawed portions of ready-to-eat food to rise above 41°F (5°C), or (iv) For a period of time that does not allow thawed portions of a raw animal food requiring cooking to be above 41°F (5°C), for more than 4 hours including: (I) The time the food is exposed to the running water and the time needed for preparation for cooking, or (II) The time it takes under refrigeration to lower the food temperature to 41°F (5°C);
3. As part of a cooking process if the food that is frozen is: (i) Cooked as specified under subsections (5)(a)1 or 2 or (5)(b) of this Rule, or (ii) Thawed in a microwave oven and immediately transferred to conventional cooking equipment, with no interruption in the process; or
4. Using any procedure if a portion of frozen ready-to-eat food is thawed and prepared for immediate service in response to an individual consumer's order.
5. Reduced oxygen packaged fish that bears a label indicating that it is to be kept frozen until time of use shall be removed from the reduced oxygen environment: (i) Prior to its thawing under refrigeration that maintains the food temperature at 41°F (5°C) or less; or (ii) Prior to, or immediately upon completion of its thawing, using procedures to completely submerge in running water as specified in paragraph 2 of this subsection. COS: PIC discarded salmon educated PIC about rop packing and its risk.

Observed failure to cover food on display at the front food service area. Food on display shall be prevented from environmental contamination. Advised PIC to cover food.