Apr 14, 2026
Routine
16B - plumbing installed; proper backflow devices
Regulation: 511-6-1.06(2)(j) - backflow prevention device when required (p)
Observed no Air gap installed on prep sinks.
. 511-6-1.06(2)(j) - Backflow Prevention Device When Required (P) (j) Backflow Prevention Device, When Required. A plumbing system shall be installed to preclude backflow of a solid, liquid, or gas contaminant into the water supply system at each point of use at the food service establishment, including on a hose bib if a hose is attached or on a hose bib if a hose is not attached and backflow prevention is required by law, by:
-
Providing an air gap; P or
-
Installing an approved backflow prevention devices.
CA: must provide a air gap on prep sinks within 10 days.
16B - plumbing installed; proper backflow devices
Regulation: 511-6-1.06(2)(r) - system maintained in good repair (p, c)
Observed leaking pipe under 3 compartment sink and on the hot water handle.
511-6-1.06(2)(r) - System Maintained in Good Repair (P, C) (r) System Maintained in Good Repair. A plumbing system shall be repaired according to law; P and maintained in good repair.
CA: must repair leaking pipes within 10 days.
16B - plumbing installed; proper backflow devices
Regulation: 511-6-1.06(2)(r) - system maintained in good repair (p, c)
Observed leaking pipe under the prep sinks in the prep area near dry storage room.
511-6-1.06(2)(r) - System Maintained in Good Repair (P, C) (r) System Maintained in Good Repair. A plumbing system shall be repaired according to law; P and maintained in good repair.
CA: Must repair leaks under prep sinks within 10 days.
15A - food and nonfood-contact surfaces cleanable, properly designed, constructed, and used
Regulation: 511-6-1.05(1)(a) - materials, general requirements (p, c)
Hood filters not equipped with a drip tray.
511-6-1.05(1)(a) - Materials, General Requirements (P, C) (1) Materials.
(a) General Requirements. Utensils and food-contact surfaces of equipment shall be made of materials that do not allow the migration of deleterious substances or impart colors, odors, or tastes to food and under normal use conditions, and shall be: P safe P, durable, corrosion-resistant, and nonabsorbent. In addition, materials shall be sufficient in weight and thickness to withstand repeated warewashing and shall be finished to have a smooth, easily cleanable surface. Materials shall be resistant to pitting, chipping, crazing, scratching, scoring, distortion and decomposition.
CA: Provide a drip tray for hood within 30 days.
15C - nonfood-contact surfaces clean
Regulation: 511-6-1.05(7)(d) - nonfood-contact surfaces (c)
Observed soiled prep top coolers door handles.
511-6-1.05(7)(d) - Nonfood-Contact Surfaces (C) (d) Nonfood-Contact Surfaces. Nonfood-contact surfaces of equipment shall be cleaned at a frequency necessary to preclude accumulation of soil residues.
17C - physical facilities installed, maintained, and clean
Regulation: 511-6-1.07(2)(f),(g) - wall & ceiling coverings & coatings; wall & ceiling attachments (c)
Observed missing Ceiling tiles and damaged ceiling tiles.
511-6-1.07(2)(f),(g) - Wall & Ceiling Coverings & Coatings; Wall & Ceiling Attachments (C) (f) Wall and Ceiling Coverings and Coatings.
-
Wall and ceiling covering materials shall be nonabsorbent, light colored, and attached so that they are easily cleanable.
-
Except in areas used only for dry storage, concrete, porous blocks, or bricks used for indoor wall construction shall be finished and sealed to provide a smooth, nonabsorbent, easily cleanable surface.
(g) Walls and Ceiling, Attachments.
-
Except as specified in paragraphs 2 of this subsection, attachments to walls and ceilings such as light fixtures, mechanical room ventilation system components, vent covers, wall mounted fans, decorative items, and other attachments shall be easily cleanable.
-
In a consumer area, wall and ceiling surfaces and decorative items and attachments that are provided for ambiance need not meet this requirement if they are kept clean.
CA: Must replace missing and damaged ceiling tiles within 30 days.