East Point, Fulton County

H.J.C. Bowden Senior Multipurpose Facility

2885 CHURCH ST EAST POINT, GA 30344

Food
Latest score
100
Mar 5, 2026
City
East Point
County
Fulton
Inspections
5

Score history

Inspection scores over time for this facility.

Inspection history

Georgia inspection history is score-based, with violations grouped under each recorded inspection.

Mar 5, 2026

Followup

Score: 1000 violations
No violations recorded for this inspection.

Feb 23, 2026

Routine

Score: 766 violations

6-1C - proper cooling time and temperature

Regulation: 511-6-1.04(6)(d) - cooling (p)

9 ptsCorrected: YesRepeat: No

Observed cooked baked beans 47 F, potato salad 52 F and broccoli 49 F prepared on 2/20/2026 holding on shelf and speed cart in walk in cooler with kitchen. Operator discarded all TCS foods at time of inspection. 511-6-1.04(6)(d) - Cooling (P) (d) Cooling.

  1. Cooked time/temperature control for safety food shall be cooled:

(i) Within 2 hours from 135°F (57°C) to 70°F (21°C); P and

(ii) Within a total of 6 hours from 135°F (57°C) to 41°F (5°C) or less. P

6-2 - proper date marking and disposition

Regulation: 511-6-1.04(6)(g) - ready-to-eat time/temperature control for safety food, date marking (pf)

4 ptsCorrected: YesRepeat: No

Observed cooked sausage patties held on speed cart in walk in cooler without date label in kitchen. Operator discarded sausage patties during inspection. 511-6-1.04(6)(g) - Ready-To-Eat Time/Temperature Control for Safety Food, Date Marking (Pf) (g) Ready-to-Eat Time/Temperature Control for Safety Food, Date Marking

  1. Except when packaging food using a reduced oxygen packaging method, and except as specified in paragraphs 5 and 6 of this subsection, refrigerated, ready-to-eat, time/temperature control for safety food prepared and held in a food establishment for more than 24 hours shall be clearly marked to indicate the date or day by which the food shall be consumed on the premises, sold, or discarded, when held at a temperature of 41°F (5°C) or below for a maximum of 7 days. The day of preparation shall be counted as Day 1. Pf

  2. Except as specified in paragraphs 5 through 7 of this subsection, refrigerated, ready-to-eat, time/temperature control for safety food prepared and packaged by a food processing plant shall be clearly marked, at the time the original container is opened in a food service establishment and if the food is held for more than 24 hours, to indicate the date or day by which the food shall be consumed on the premises, sold, or discarded, when held at a temperature of 41°F (5°C) or below for a maximum of 7 days after the original container is opened. The day the original container is opened in the food service establishment shall be counted as Day 1, except, the day or date marked by the food service establishment may not exceed a manufacturer’s use by date if the manufacturer determined the use-by date based on food safety; Pf

  3. A refrigerated, ready-to-eat, time/temperature control for safety food ingredient or a portion of a refrigerated, ready-to-eat, time/temperature control for safety food that is subsequently combined with additional ingredients or portions of food shall retain the date marking of the earliest-prepared or first-prepared ingredient. Pf (ii) Marking the date or day of preparation, with a procedure to discard the food on or before the last date or day by which the food must be consumed on the premises, sold, or discarded;

(iii) Marking the date or day the original container is opened in a food service establishment, with a procedure to discard the food on or before the last date or day by which the food must be consumed on the premises, sold, or discarded; or

(iv) Using calendar dates, days of the week, color-coded marks, or other effective marking methods, provided that the marking system is disclosed to the Health Authority upon request.

8-2B - toxic substances properly identified, stored, used

Regulation: 511-6-1.07(6)(b) - working containers, common name (pf)

4 ptsCorrected: YesRepeat: No

Observed plastic spray bottle holding degreaser stored on shelf in chemical closet not labeled. Operator labeled spray bottle during inspection. 511-6-1.07(6)(b) - Working Containers, Common Name (Pf) (b) Working Containers, Common Name. Working containers used for storing poisonous or toxic materials such as cleaners and sanitizers taken from bulk supplies shall be clearly and individually identified with the common name of the material. Pf

10D - food properly labeled; original container

Regulation: 511-6-1.04(4)(d) - food storage containers identified with common name of food (c)

3 ptsCorrected: YesRepeat: No

Observed plastic bottles holding butter no label on food prep table and shelves in kitchen. Observed plastic container holding chicken seasoning no label in kitchen. Observed plastic container holding paprika flour no label in kitchen. Operator labeled all plastic bottles and containers during inspection. 511-6-1.04(4)(d) - Food Storage Containers Identified with Common Name of Food (C) (d) Food Storage Containers, Identified with Common Name of Food. Except for containers holding food that can be readily and unmistakably recognized, such as dry pasta, working containers holding food or food ingredients that are removed from their original packages for use in the food establishment, such as cooking oils, flour, herbs, potato flakes, salt, spices, and sugar shall be clearly and legibly identified, in English, with the common name of the food.

12A - contamination prevented during food preparation, storage, display

Regulation: 511-6-1.04(4)(q) - food storage (c)

3 ptsCorrected: YesRepeat: No

Observed container of cooking oil stored on floor underneath prep table in kitchen. Operator removed oil from floor during inspection. 511-6-1.04(4)(q) - Food Storage (C) (q) Food Storage.

  1. Except as specified in paragraphs 2 and 3 of this subsection, food shall be protected from contamination by storing the food:

(i) In a clean, dry location;

(ii) Where it is not exposed to splash, dust, or other contamination; and

(iii) At least 6 inches (15 cm) above the floor.

15B - warewashing facilities: installed, maintained, used; test strips

Regulation: 511-6-1.05(2)(cc) - warewashing, automatic dispensing of detergents and sanitizers (pf)

1 ptsCorrected: NoRepeat: No

Observed chemical dish machine sanitizer 0 ppm during inspection. Operator placed maintenance service work order during inspection.

511-6-1.05(2)(cc) - Warewashing, Automatic Dispensing of Detergents and Sanitizers (Pf) (cc) Warewashing Machines, Automatic Dispensing of Detergents and Sanitizers. A warewashing machine that is installed after September 12, 2007 shall be designed and equipped to: automatically dispense detergents and sanitizers Pf and incorporate a visual means to verify that detergents and sanitizers are delivered or a visual or audible alarm to signal if the detergents and sanitizers are not delivered to the respective washing and sanitizing cycles. Pf

Apr 23, 2025

Routine

Score: 882 violations

3-1C - food in good condition, safe, and unadulterated

Regulation: 511-6-1.04(3)(e) - package integrity (pf)

9 ptsCorrected: YesRepeat: No

Observed dented cans in the dry storage area. Food shall be safe and unadulterated. Advised PIC to discard dented cans.

12A - contamination prevented during food preparation, storage, display

Regulation: 511-6-1.04(4)(r) - food storage, prohibited areas (c)

3 ptsCorrected: YesRepeat: No

Observed failure to store food 6 inches off the floor. Food shall be stored 6 inches off the floor.

Mar 28, 2024

Routine

Score: 913 violations

4-2B - food-contact surfaces: cleaned & sanitized

Regulation: 511-6-1.05(7)(a)1 - equipment, food-contact surfaces,& utensils (pf)

4 ptsCorrected: NoRepeat: Yes

Observed interior flap of ice machine with pink build up. Ca: all food contact surfaces shall be cleaned to sight and touch.

511-6-1.05(7)(a)1 - Equipment, Food-Contact Surfaces,& Utensils (Pf) (7) Cleaning of Equipment and Utensils.

(a) Equipment, Food-Contact Surfaces, and Utensils.

  1. Equipment food-contact surfaces and utensils shall be clean to sight and touch.

15A - food and nonfood-contact surfaces cleanable, properly designed, constructed, and used

Regulation: 511-6-1.05(6)(a) - good repair & proper adjustment (c)

1 ptsCorrected: NoRepeat: No

Observed gaskets on warmer in need of repair to keep heat in. Ca: all equipment must be in good repair.

511-6-1.05(6)(a) - Good Repair & Proper Adjustment (C) (6) Maintenance and Operation.

(a) Good Repair and Proper Adjustment.

  1. Equipment shall be maintained in a state of repair and condition that meets the requirements specified under subsections (1) and (2)of this Rule.

  2. Equipment components such as doors, seals, hinges, fasteners, and kick plates shall be kept intact, tight, and adjusted in accordance with manufacturer's specifications.

  3. Cutting or piercing parts of can openers shall be kept sharp to minimize the creation of metal fragments that can contaminate food when the container is opened.

17C - physical facilities installed, maintained, and clean

Regulation: 511-6-1.07(5)(a),(b) - good repair, physical facilities maintained; cleaning, frequency & restrictions, cleaned often enough to keep them clean (c)

1 ptsCorrected: NoRepeat: Yes

Observed ice build up in WIC and WIF. CA: all physical facilities shall remain in good repair. COS: PIC placed work order for repair.

511-6-1.07(5)(a),(b) - Good Repair, physical facilities maintained; Cleaning, Frequency & Restrictions, cleaned often enough to keep them clean (C) (5) Maintenance and Operation.

(a) Good Repair. All physical facilities shall be maintained in good repair.

(b) Cleaning, Frequency and Restrictions.

  1. The physical facilities shall be cleaned as often as necessary to keep them clean and by methods that prevent contamination of food products.

  2. Except for cleaning that is necessary due to a spill or other accident, cleaning shall be done during periods when the least amount of food is exposed, such as after closing

Oct 20, 2023

Routine

Score: 867 violations

4-2B - food-contact surfaces: cleaned & sanitized

Regulation: 511-6-1.05(7)(a)1 - equipment, food-contact surfaces,& utensils (pf)

4 ptsCorrected: NoRepeat: Yes

Observed the interior flap of the ice machine with black, mold-like buildup. CA: Informed PIC to have ice machine cleaned. PIC put in work order for ice machine.

511-6-1.05(7)(a)1 - Equipment, Food-Contact Surfaces,& Utensils (Pf) (7) Cleaning of Equipment and Utensils.

(a) Equipment, Food-Contact Surfaces, and Utensils.

  1. Equipment food-contact surfaces and utensils shall be clean to sight and touch.

4-2B - food-contact surfaces: cleaned & sanitized

Regulation: 511-6-1.05(7)(a)1 - equipment, food-contact surfaces,& utensils (pf)

4 ptsCorrected: NoRepeat: No

Observed buildup on can opener in main kitchen. COS: Can opener was removed and sanitized.

511-6-1.05(7)(a)1 - Equipment, Food-Contact Surfaces,& Utensils (Pf) (7) Cleaning of Equipment and Utensils.

(a) Equipment, Food-Contact Surfaces, and Utensils.

  1. Equipment food-contact surfaces and utensils shall be clean to sight and touch.

6-2 - proper date marking and disposition

Regulation: 511-6-1.04(6)(h) - ready-to-eat time/temperature control for safety food, disposition (p)

4 ptsCorrected: YesRepeat: No

Observed several condiment containers, such as sour cream 10/2 and Italian dressing 7/14/22, held in WIC past its expiration date. CA: Informed PIC to continuously check expiration date on products to ensure they are properly disposed of. COS: Items were discarded.

511-6-1.04(6)(h) - Ready-To-Eat Time/Temperature Control for Safety Food, Disposition (P) (h) Ready-to-Eat, Time/Temperature Control for Safety Food, Disposition.

  1. A food that requires datemarking shall be discarded if it:

(i) Exceeds 7 days, not including the time that the product is frozen; P

(ii) Is in a container or package that does not bear a date or day; P or

(iii) Is appropriately marked with a date or day that exceeds 7 days . P

  1. Refrigerated, ready-to-eat, time / temperature control for safety food prepared in a food service establishment and dispensed through a vending machine with an automatic shutoff control shall be discarded if it exceeds 7 days. P

11C - approved thawing methods used

Regulation: 511-6-1.04(6)(c) - thawing (c)

3 ptsCorrected: YesRepeat: No

Observed employee thawing fish in a sink of water without a continuous flow of water. Also observed frozen fish sitting on counter to thaw. CA: Informed PIC that when thawing, it must be under a continuous source of water or in the cooler. COS: PIC turned water on and moved frozen fish to water source.

511-6-1.04(6)(c) - Thawing (C) (c) Thawing. Except as specified in paragraph 4 of this subsection, time/temperature control for safety food shall be thawed:

  1. Under refrigeration that maintains the food temperature at 41°F (5°C) or less; or

  2. Completely submerged under running water:

(i) At a water temperature of 70°F (21°C) or below,

(ii) With sufficient water velocity to agitate and float off loose particles in an overflow, and

(iii) For a period of time that does not allow thawed portions of ready-to-eat food to rise above 41°F (5°C), or

(iv) For a period of time that does not allow thawed portions of a raw animal food requiring cooking to be above 41°F (5°C), for more than 4 hours including:

(I) The time the food is exposed to the running water and the time needed for preparation for cooking, or

(II) The time it takes under refrigeration to lower the food temperature to 41°

17C - physical facilities installed, maintained, and clean

Regulation: 511-6-1.07(5)(a),(b) - good repair, physical facilities maintained; cleaning, frequency & restrictions, cleaned often enough to keep them clean (c)

1 ptsCorrected: YesRepeat: No

Observed WIF with ice buildup on multiple shelves and around pipes near the unit. CA: Advised PIC to have work in order put in for ice buildup. COS: Maintenance came and looked at unit and ordered part to fix it.

511-6-1.07(5)(a),(b) - Good Repair, physical facilities maintained; Cleaning, Frequency & Restrictions, cleaned often enough to keep them clean (C) (5) Maintenance and Operation.

(a) Good Repair. All physical facilities shall be maintained in good repair.

(b) Cleaning, Frequency and Restrictions.

  1. The physical facilities shall be cleaned as often as necessary to keep them clean and by methods that prevent contamination of food products.

  2. Except for cleaning that is necessary due to a spill or other accident, cleaning shall be done during periods when the least amount of food is exposed, such as after closing.

17C - physical facilities installed, maintained, and clean

Regulation: 511-6-1.07(5)(a),(b) - good repair, physical facilities maintained; cleaning, frequency & restrictions, cleaned often enough to keep them clean (c)

1 ptsCorrected: NoRepeat: No

Observed gasket on warmer cabinet in main kitchen in need of repairing. CA: Informed PIC to replace gasket to keep air inside of warmer when in use.

511-6-1.07(5)(a),(b) - Good Repair, physical facilities maintained; Cleaning, Frequency & Restrictions, cleaned often enough to keep them clean (C) (5) Maintenance and Operation.

(a) Good Repair. All physical facilities shall be maintained in good repair.

17C - physical facilities installed, maintained, and clean

Regulation: 511-6-1.07(5)(a),(b) - good repair, physical facilities maintained; cleaning, frequency & restrictions, cleaned often enough to keep them clean (c)

1 ptsCorrected: NoRepeat: No

Observed the floor inside of the WIC and under equipment needs to be cleaned thoroughly. CA: Informed PIC to have floors inside of WICs and under equipment cleaned.

(b) Cleaning, Frequency and Restrictions.

  1. The physical facilities shall be cleaned as often as necessary to keep them clean and by methods that prevent contamination of food products.

  2. Except for cleaning that is necessary due to a spill or other accident, cleaning shall be done during periods when the least amount of food is exposed, such as after closing.