HUEY MAGOOS

Observed no handwashing cleanser at the hand sink next to the raw chicken station. PIC stated that the dispenser was not working. 511-6-1.07(3)(a) - Handwashing Cleanser, Availability (Pf) (3) Numbers and Capacities. (a) Handwashing Cleanser, Availability. Each handwashing sink or group of two adjacent handwashing sinks shall be provided with a supply of hand cleaning liquid, powder, or bar soap. Pf COS: The PIC obtained a liquid cleanser to be used at this sink. EHS educated on the importance of having handwashing cleanser available at all hand sinks.

Observed the most recent inspection report to not be posted. 511-6-1.02(1)(d) - Displaying of the Inspection Report (C)

1. The most current inspection report shall be prominently displayed in public view at all times, within fifteen feet of the front or primary public door and between five feet and seven feet from the floor and in an area where it can be read at a distance of one foot away.
2. Food service establishments with drive-thru windows will post the current inspection report, and also have the inspection report posted so that a minimum of the top one-third of a copy of the current inspection report is visible through each window allowing customers to easily read the score, date of inspection and establishment information. Note: The facility will need to post the most recent inspection up in public view.

Observed cutting board of the salad cold holding unit to have deep grooves and soil accumulation. 511-6-1.05(6)(b) - Cutting Surfaces (C) (b) Cutting Surfaces. Surfaces such as cutting blocks and boards that are subject to scratching and scoring shall be resurfaced if they can no longer be effectively cleaned and sanitized, or discarded if they cannot be resurfaced. Note: The facility will need to have the cutting surface resurfaced or replaced as needed.

Observed the side doors of the outside dumpsters to not be closed. 511-6-1.06(5)(n) - Covering Receptacles (C) (n) Covering Receptacles. Receptacles and waste handling units for refuse, recyclables, and returnables shall be kept covered: 2. With tight-fitting lids or doors if kept outside the food service establishment. COS: The PIC immediately closed the side doors.

Observed the right dumpster to be missing a drain plug. 511-6-1.06(5)(o),(p) - Using Drain Plugs; Maintaining Refuse Areas (C) (o) Using Drain Plugs. Drains in receptacles and waste handling units for refuse, recyclables, and returnables shall have drain plugs in place. Note: The facility will need to have the drain plug replaced.

Observed container full of water in the front food service hand sink, and observed a trash can to be fully blocking the handwashing sink next to the chicken batter prep station. 511-6-1.06(2)(o) - Using a Handwashing Sink- Operation & maintenance (Pf) (o) Using a Handwashing Sink.

1. A handwashing sink shall be maintained so that it is accessible at all times for employee use.
2. A handwashing facility may not be used for purposes other than handwashing. COS: The PIC immediately moved the trash can, and removed the container from the hand sink.

A plastic bowl of Coleslaw Salad was observed cooling in the walk in cooler covered. 511-6-1.04(6)(e) - Cooling Methods (Pf, C) (e) Cooling Methods.

1. Cooling shall be accomplished in accordance with the time and temperature criteria specified under DPH Rule 511-6-1-.04(6)(d) by using one or more of the following methods depending on the type of food being cooled:

(i) Placing the food in shallow pans; Pf

(ii) Separating the food into smaller or thinner portions; Pf

(iii) Using rapid cooling equipment; Pf

(iv) Stirring the food in a container placed in an ice water bath; Pf

(v) Using containers that facilitate heat transfer; Pf

(vi) Adding ice as an ingredient; Pf or

(vii) Other effective methods. Pf

2. When placed in cooling or cold holding equipment, food containers in which food is being cooled shall be:

(i) Arranged in the equipment to provide maximum heat transfer through the container walls; and

(ii) Loosely covered, or uncovered if protected from overhead contamination during the cooling period to facilitate heat transfer from the surface of the food. Note: Coleslaw salad was immediately uncovered during the inspection.

The dish washing machine was observed with an inoperable pressure guage. 511-6-1.07(5)(a),(b) - Good Repair, physical facilities maintained; Cleaning, Frequency & Restrictions, cleaned often enough to keep them clean (C) (5) Maintenance and Operation.

(a) Good Repair. All physical facilities shall be maintained in good repair.

Observed accumulation mold-like substance in several nozzles of both soda dispensers.

5. Except when dry cleaning methods are used as specified under subsection (7)(e) of this Rule, surfaces of utensils and equipment contacting food that is not time/temperature control for safety food shall be cleaned:

(iv) In equipment such as ice bins and beverage dispensing nozzles and enclosed components of equipment such as ice makers, cooking oil storage tanks and distribution lines, beverage and syrup dispensing lines or tubes, coffee bean grinders, and water vending equipment:

(I) At a frequency specified by the manufacturer; or

(II) Absent manufacturer specifications, at a frequency necessary to preclude accumulation of soil or mold.

Observed facility to have no sanitizer set up, as the facility had run out of QAC sanitizer.

2. Except as specified in paragraph 3 of this subsection, if used with time/temperature control for safety food, equipment food-contact surfaces and utensils shall be cleaned at least every 4 hours throughout the day.

Note: EHS educated PIC on importance of having a sanitizer ready to be used. EHS showed PIC how to generate a chlorine sanitizer with bleach. New bleach solution registered at 50 ppm.

Observed hand sink in men's restroom to peak at a temperature of 93 F.

Hot water generation and distribution systems shall be sufficient to meet the peak hot water demands throughout the food service establishment.

Note: PIC will call appropriate personnel to restore hot water at men's restroom hand sink.

511-6-1.06(1)(g),(h) - Water Supply, Capacity; Pressure (Pf) (g) Capacity.

1. The water source and system shall be of sufficient capacity to meet the peak water demands of the food service establishment. Pf

2. Hot water generation and distribution systems shall be sufficient to meet the peak hot water demands throughout the food service establishment. Pf (h) Pressure. Water under pressure shall be provided to all fixtures, equipment, and nonfood equipment that are required to use water except that water supplied as specified under subsection (1)(k)1 and 2 to a temporary food service operation or in response to a temporary interruption of a water supply need not be under pressure. Pf Note: Facilities Men's restroom hand sink did not reach the minimum required temperature of 100F. Facility has 10 days to correct.