Jun 2, 2026
Routine
6-1A - proper cold holding temperatures
Regulation: 511-6-1.04(6)(f) - time/temperature control for safety; cold holding (p)
Observed birria and shredded cheese being stored in RIC that had a temp above 41 F. CA: PIC must make sure items stored in reach in stay within the correct temperature ranges. COS: I had PIC begin arranging birria and cheese and other TCS items to better cool. Items that were prepped today were moved into prep cooler 1 to begin cooling.
511-6-1.04(6)(f) - Time/Temperature Control for Safety; Cold Holding (P) (f) Time/Temperature Control for Safety Food, Hot and Cold Holding. Except during preparation, cooking, or cooling, or when time is used as the public health control, time/temperature control for safety food shall be maintained at 41°F (5°C) or below or 135°F (57°C) or above, except that roasts cooked to a temperature and for a time specified in subsection (5)(a)2 of this Rule and reheated using the same temperature and time conditions as cooking may be held at a temperature of 130°F (54°C) or above.
11D - thermometers provided and accurate
Regulation: 511-6-1.05(2)(x) - tmd, located in refrigerators/ hot holding (pf, c)
Observed that there was a broken thermometer within the RIC in the back/main kitchen. COS: PIC replaced thermometer with a brand new spare thermometer.CA: PIC must make sure that a thermometer is always within cold holding units in order to keep temperatures within the correct ranges.
511-6-1.05(2)(x) - TMD, Located in Refrigerators/ Hot Holding (Pf, C) (x) Temperature Measuring Devices.
-
In a mechanically refrigerated or hot food storage unit, the sensor of a temperature measuring device shall be located to measure the air temperature in the warmest part of a mechanically refrigerated unit and in the coolest part of a hot food storage unit.
-
Except as specified in paragraph 3 of this subsection, cold or hot holding equipment used for time/temperature control for safety food shall be designed to include and shall be equipped with at least one integral or permanently affixed temperature measuring device that is located to allow easy viewing of the device's temperature display.
-
The requirement in paragraph 2 of this subsection does not apply to equipment for which the placement of a temperature measuring device is not a practical means for measuring the ambient air surrounding the food because of the design, type, and use of the equipment such as insulated food transport containers and salad bars.
-
Temperature measuring devices shall be designed to be easily readable.
-
Food temperature measuring devices and water temperature measuring devices on warewashing machines shall have a numerical scale, printed record, or digital readout in increments no greater than 1ºC or 2ºF in the intended range of use.