Feb 16, 2026
Routine
14A - in-use utensils: properly stored
Regulation: 511-6-1.04(4)(k) - in-use utensils, between-use storage (c)
Scoop used to transfer hashbrowns from prep top cooler to grill was seen inside of the container.
511-6-1.04(4)(k) - In-Use Utensils, Between-Use Storage (C) (k)Storage of In-Use Utensils. During pauses in food preparation or dispensing, food preparation and dispensing utensils shall be stored:
1.Except as specified under paragraph 2 of this subsection, in the food with their handles above the top of the food and the container;
2.In food that is not time/temperature control for safety food with their handles above the top of the food within containers or equipment that can be closed, such as bins of sugar, flour, or cinnamon;
3.On a clean portion of the food preparation table or cooking equipment only if the in-use utensil and the food-contact surface of the food preparation table or cooking equipment are cleaned and sanitized at a frequency specified under DPH Rule 511-6-1-.05(7)(b) and (8)(a);
4.In running water of sufficient velocity to flush particulates to the drain, if used with moist food such as ice cream or mashed potatoes;
-
In a clean, protected location if the utensils, such as ice scoops, are used only with a food that is not time/temperature control for safety food; or
-
In a container of water if the water is maintained at a temperature of at least 135°F (57°C) and the container is cleaned at a frequency specified under DPH Rule 511-6-1-.05(7)(b)3(vi).
C/A: Scoop needs to be placed on a clean, non-contact surface instead of resting in the food.
15B - warewashing facilities: installed, maintained, used; test strips
Regulation: 511-6-1.05(3)(h),(i),(j) - temperature measuring device, manual warewashing; sanitizing solutions, testing device (pf)
PIC was unable to provide test strips at time of inspection. Employee went to neighboring location to pick up stickers to test dishwasher.
511-6-1.05(3)(h),(i),(j) - Temperature Measuring Device, Manual Warewashing; Sanitizing Solutions, Testing Device (Pf) (h) Temperature Measuring Devices, Manual and Mechanical Warewashing.
-
In manual warewashing operations, a temperature measuring device shall be provided and readily accessible for frequently measuring the washing and sanitizing temperatures. Pf
-
In hot water mechanical warewashing operations, an irreversible registering temperature indicator shall be provided and readily accessible for measuring the utensil surface temperature. Pf
(i) Sanitizing Solutions, Testing Devices. A test kit or other device that accurately measures the concentration in mg/L of sanitizing solutions shall be provided. Pf
C/A: PIC was informed that testing strips/stickers must be present at all times to test for proper ware washing temperatures/concentrations.