Mar 24, 2026
Followup
11A - proper cooling methods used: adequate equipment for temperature control
Regulation: 511-6-1.04(6)(e) - cooling methods (pf, c)
Cooling Methods.
- Cooling shall be accomplished in accordance with the time and temperature criteria specified under DPH Rule 511-6-1-.04(6)(d) by using one or more of the following methods depending on the type of food being cooled:
(i) Placing the food in shallow pans;
(ii) Separating the food into smaller or thinner portions;
(iii) Using rapid cooling equipment;
(iv) Stirring the food in a container placed in an ice water bath;
(v) Using containers that facilitate heat transfer;
(vi) Adding ice as an ingredient;
(vii) Other effective methods.
- When placed in cooling or cold holding equipment, food containers in which food is being cooled shall be:
(i) Arranged in the equipment to provide maximum heat transfer through the container walls; and
(ii) Loosely covered, or uncovered if protected from overhead contamination during the cooling period to facilitate heat transfer from the surface of the food.
Upon arrival observed multiple batches of Dhal being cooled in large portions in Blast Chiller in kitchen. Said food was observed not rapidly cooling as method used does not facilitate a rapid heat transfer from the surface of the food. Person in charge was advised to break said food item into smaller portions and to implement a cooling log to ensure adequate cooling is achieved.
12A - contamination prevented during food preparation, storage, display
Regulation: 511-6-1.04(4)(z) - miscellaneous sources of contamination (c)
Miscellaneous Sources of Contamination. Food shall be protected from contamination that may result from a factor or source not specified under paragraphs (a) through (y) of this subsection. Observed multiple food items stored in direct contact with " Thank you" shopping bags in walk in freezer in rear food storage area. Person in Charge was advised to store food items in food grade bags to prevent an possible cross contamination.
15C - nonfood-contact surfaces clean
Regulation: 511-6-1.05(7)(a)2,3 - equipment, food/nonfood-contact surfaces, and utensils, food-contact surfaces of cooking equipment & nonfood-contact surfaces free of accumulations (c)
Nonfood-contact surfaces of equipment shall be kept free of an accumulation of dust, dirt, food residue, and other debris. Observed an accumulation of food residue on rusted, chipped floor in meat and dairy walk in cooler in kitchen. Person In charge was advised to have said floor repaired and send invoice to inspector vai email by 3/31/2026.