Apr 15, 2026
Permit/Opening
15 - depth and no diving markers, step marking; installed and contrasting
Regulation: 511-3-5-.18(3)(h) - (h) depth markers number and letters shall be tile and four inches minimum in height. numbers shall be of contrasting color to the background on which they are applied.
There are no tile depth markers. Stencils are used. Depth markers number and letters shall be tile and four inches minimum in height. Numbers shall be of contrasting color to the background on which they are applied. These must be in compliance prior to permitting 2028.
15 - depth and no diving markers, step marking; installed and contrasting
Regulation: .06(3)(e) - markings
There is no contrasting marking at the edge of each step and bench. : The outer two inches of each step, seat bench, or tanning ledge, shall be marked with slip resistant tiles in a contrasting color.
17 - skimmers/gutters maintained and operable
Regulation: 511-3-5-.11(3)(d) - (d) each skimmer shall have a weir that adjusts automatically to variations in water level over a minimum range of four inches.
A weir is not present in each skimmer. Replace weirs in skimmers. Each skimmer shall have a weir that adjusts automatically to variations in water level over a minimum range of four inches.
22 - signs: peak occupancy/pool/spa/signs legible and in clearview
Regulation: 511-3-5-.18(12)(a) - (a) the words "no diving" and the universal international symbol for “no diving” shall be permanently visible at the edge of the deck for water five feet in depth or less, placed only on the deck beside the depth markers, and shall conform to that ou
The wording for "No Diving" on the deck does not meet proper requirements as outlined for depth markers and no universal symbol for No Diving is present. The words "No Diving" and the universal international symbol for “NO DIVING” shall be permanently visible at the edge of the deck for water five feet in depth or less, placed only on the deck beside the depth markers, and shall conform to that outlined for depth markers in subsections. Depth markers must be permanent and on non-slip tiles, in contrasting color. Must be corrected by permitting 2028.
37 - other violations of the chapter
.11(3)(e) There is no equalizer check valve and float valve assembly present in each skimmer. Each skimmer shall be equipped with a trimmer valve capable of distributing the total flow between individual skimmers.
37 - other violations of the chapter
.04(9)(d) The coping at the waterfall area is in disrepair and jagged. All surfaces that come in contact with the user shall be finished so that they do not constitute a cutting, pinching, puncturing or abrasion hazard under casual contact and intended use. All materials shall be maintained in accordance with manufacturer's instructions.