Fogon and Lions Alpharetta

Except during preparation, cooking, or cooling, or when time is used as the public health control, time/temperature control for safety food shall be maintained at 41°F (5°C) or below or 135°F (57°C) or above, except that roasts cooked to a temperature and for a time specified in subsection (5)(a)2 of this Rule and reheated using the same temperature and time conditions as cooking may be held at a temperature of 130°F (54°C) or above. P

Observed several ambient and TCS temperatures that were above 41 F. See temp log for readings.

Hot and Cold Holding. Except during preparation, cooking, or cooling, or when time is used as the public health control, time/temperature control for safety food shall be maintained at 41°F (5°C) or below or 135°F (57°C) or above, except that roasts cooked to a temperature and for a time specified in subsection (5)(a)2 of this Rule and reheated using the same temperature and time conditions as cooking may be held at a temperature of 130°F (54°C) or above. P

PIC will have all cold holding units on the rill prep line turned down to 36 F to accommodate for the heat as well as move all TCS items prepped today to the WIC.

Observed a can opener with a soiled blade in the salad prep area.

1. Equipment food-contact surfaces and utensils shall be clean to sight and touch. PIC had can opener wash and sanitized.

Observed a black mold like substance on the nozzles of the drink guns at the bar. 5. Except when dry cleaning methods are used as specified under subsection (7)(e) of this Rule, surfaces of utensils and equipment contacting food that is not time/temperature control for safety food shall be cleaned: (iv) In equipment such as ice bins and beverage dispensing nozzles and enclosed components of equipment such as ice makers, cooking oil storage tanks and distribution lines, beverage and syrup dispensing lines or tubes, coffee bean grinders, and water vending equipment:

(I) At a frequency specified by the manufacturer; or

(II) Absent manufacturer specifications, at a frequency necessary to preclude accumulation of soil or mold.

PIC had all the drink guns cleaned and sanitized

Observed several scored and stained cutting boards that were not in use at the time of the inspection.

1. Multiuse food-contact surfaces shall be:

(i) Smooth; Pf

(ii) Free of breaks, open seams, cracks, chips, inclusions, pits, and similar imperfections; Pf

(iii) Free of sharp internal angles, corners, and crevices; Pf

(iv) Finished to have smooth welds and joints; Pf and

(v) Except as specified in paragraph 2 of this subsection, accessible for cleaning and inspection by one of the following methods:

(I) Without being disassembled, Pf

(II) By disassembling without the use of tools, Pf or

(III) By easy disassembling with the use of handheld tools commonly available to maintenance and cleaning personnel such as screwdrivers, pliers, open-end wrenches, and Allen wrenches. Pf PIC will discard and replace these cutting boards.