Foxy Fox Pizza

Observed interior of dish machine with golden and white build-up, interior of container holding clean dishes with food accumulation and staining, excessive scratches and black staining on bin holding cleaned pizza pans. 511-6-1.05(7)(a)1 - Equipment, Food-Contact Surfaces,& Utensils (Pf) (7) Cleaning of Equipment and Utensils.

(a) Equipment, Food-Contact Surfaces, and Utensils.

1. Equipment food-contact surfaces and utensils shall be clean to sight and touch. Pf.

Observed teas in drink dispensing area uncovered. 511-6-1.04(4)(u) - Food Display (P) (u) Food Display.

1. Except for nuts in the shell and whole, raw fruits and vegetables that are intended for hulling, peeling, or washing by the consumer before consumption, food on display shall be protected from contamination by the use of packaging; counter, service line, or salad bar food guards, display cases, or other effective means. P

2. Protective devices for counters, serving lines, salad bars and other similar food displays in food service establishments shall be designed and constructed so as to intercept contaminants which may be expelled from the customer's mouth or nose.

3. All food, whether on display, being prepared for service or placed for consumer self-service must be protected from contamination from consumers standing or sitting within eight feet of the food, except that table side finishing as approved by the Health Authority and hibachi grills will be allowed when food preparation is for immediate service.

Observed employee wearing jewelry around the wrist while preparing food items. Employee removed watch. 511-6-1.03(5)(g) - Jewelry (C) (g) Jewelry. Except for a plain ring such as a wedding band food employees may not wear jewelry including medical information jewelry on their arms and hands while preparing food.

Observed reach-in cooler with gasket in disrepair.

Observed wood in need of sealing in under dump sink at bar area. 511-6-1.05(1)(i) - Nonfood-contact Surfaces (C) (i) Nonfood-contact Surfaces. Nonfood-contact surfaces of equipment that are exposed to splash, spillage, or other food soiling or that require frequent cleaning shall be constructed of a corrosion-resistant, nonabsorbent, and smooth material.

Observed chlorine test strips expired. 511-6-1.05(6)(p) - Warewashing Equipment, Determining Chemical Sanitizer Concentration (Pf) (p) Warewashing Equipment, Determining Chemical Sanitizer Concentration. Concentration of the sanitizing solution shall be accurately determined by using a test kit or other device. Pf.

Observed debris and rusting accumulation on shelving units throughout the facility, water accumulation at bottom of reach-in cooler, and outside of industrial mixer with accumulation. 511-6-1.05(7)(a)2,3 - Equipment, Food/Nonfood-Contact Surfaces, and Utensils, food-contact surfaces of cooking equipment & nonfood-contact surfaces free of accumulations (C) 2. The food-contact surfaces of cooking equipment and pans shall be kept free of encrusted grease deposits and other soil accumulations.

3. Nonfood-contact surfaces of equipment shall be kept free of an accumulation of dust, dirt, food residue, and other debris.

Observed ceiling tiles in main kitchen containing old food debris accumulation, floors in need of resealing in the main kitchen, baseboards missing across from pizza oven and walls behind handwashing sink and 3-comparment sink with mold-like accumulation. Also observed excessive grease accumulation on wall behind dish machine.
511-6-1.07(5)(a),(b) - Good Repair, physical facilities maintained; Cleaning, Frequency & Restrictions, cleaned often enough to keep them clean (C) (5) Maintenance and Operation.

(a) Good Repair. All physical facilities shall be maintained in good repair.

(b) Cleaning, Frequency and Restrictions.

1. The physical facilities shall be cleaned as often as necessary to keep them clean and by methods that prevent contamination of food products.

2. Except for cleaning that is necessary due to a spill or other accident, cleaning shall be done during periods when the least amount of food is exposed, such as after closing.

Observed open employee drink stored next to garlic bread. PIC removed item from kitchen. 511-6-1.03(5)(k)1&2 - Eating, Drinking, or Using Tobacco (C) (k) Hygienic Practices.

1. Employees shall not use any form of tobacco products, or electronic devices that simulate tobacco smoking, while engaged in food preparation or service, nor while in areas used for equipment or utensil washing and storage, food preparation or food storage. Employees shall only use tobacco products or electronic devices that simulate tobacco smoking in approved designated areas.

2. Employees shall consume food only in approved designated areas separate from food preparation and serving areas, equipment or utensil areas and food storage areas. However, drinking from a single service beverage cup with a secure lid and straw that is handled to prevent contamination of the employee’s hands, the container, exposed food, clean equipment, utensils and linens, unwrapped single-service and single-use articles will be allowed.

Observed dish machine chlorine sanitizer solution below proper minimum concentration. PIC was advised to discontinue use of the machine. 511-6-1.05(6)(n) - Manual and Mechanical Warewashing Equipment, Chemical Sanitization-Temperature, pH, Concentration, Hardness (P,Pf) (n) Manual and Mechanical Warewashing Equipment, Chemical Sanitization - Temperature, pH, Concentration, and Hardness. A chemical sanitizer used in a sanitizing solution for a manual or mechanical operation at contact times specified under subsection (8)(b)3 of this Rule shall meet the requirements specified in DPH Rule 511-6-1-.07(6)(g), shall be used in accordance with the Environmental Protection Agency (EPA)-registered label use instructions P, and shall be used as follows:

1. A chlorine solution shall have a minimum temperature based on the concentration and pH of the solution as listed in the following chart; P

Concentration Range Minimum Temperature

MG/L PH 10 or less oF (oC) PH 8 or less oF (oC)

25-49 120 (49) 120 (49)

50-99 100 (38) 75 (24)

100 55 (13) 55 (13)

2. An iodine solution shall have a minimum temperature of 68°F (20°C)P minimum concentration between 12.5 ppm and 25 ppm, P and pH of 5.0 or less or a pH no higher than the level for which the manufacturer specifies for the solution to be effective; P

3. A quaternary ammonium compound solution shall have a minimum temperature of 75ºF (24ºC), P have a concentration as specified in DPH Rule 511-6-1-.07(6)(g) and as indicated by the manufacturer’s use directions included in the labeling, P and be used only in water with 500 ppm hardness or less or in water having a hardness no greater than specified by the EPA-registered label use instructions; P

4. If another solution of a chemical specified under paragraphs 1 through 3 of this subsection is used, the permit holder shall demonstrate to the Health Authority that the solution achieves sanitization and the use of the solution shall be approved; P

5. If a chemical sanitizer other than chlorine, iodine, or a quaternary ammonium compound is used, it shall be applied in accordance with the EPA-registered label use instructions ;P and

6. If a chemical sanitizer is generated by a device located on-site at the food service establishment, it shall be used as specified in 1-5 of this subsection and shall be produced by a device that:

(i) complies with law as specified in sections 2(q)(1) and 12 of the Federal Insecticide, Fungicide, and Rodenticide Act (FIFRA), P

(ii) complies with 40 CFR 152.500 Requirement for Devices and 40 CFR 156.10 Labeling Requirements, P

(iii) displays the EPA device manufacturing facility registration number on the device, Pf and

(iv) is operated and maintained in accordance with manufacturer’s instructions. Pf.

7. On-site chemical sanitizer generating equipment with active ingredients, such as copper, must be registered as pesticides. The active ingredient may be part of the equipment or separately added.

Observed employee wiping pizza pan with soiled towel. 511-6-1.05(8)(a) - Before use after Cleaning(P) (8) Sanitization of Equipment and Utensils.

(a) Before Use After Cleaning. Utensils and food-contact surfaces of equipment shall be sanitized before use after cleaning. P

Observed working chemical spray bottles without common name labels. 511-6-1.07(6)(b) - Working Containers, Common Name (Pf) (b) Working Containers, Common Name. Working containers used for storing poisonous or toxic materials such as cleaners and sanitizers taken from bulk supplies shall be clearly and individually identified with the common name of the material. Pf

Observed back exit doors with large gaps. 511-6-1.07(2)(m) - Outer Openings Protected (C) (m) Outer Openings, Protected.

1. Except as specified in paragraphs 2 through 5 of this subsection, outer openings of a food service establishment shall be protected against the entry of insects and rodents by:

(i) Filling or closing holes and other gaps along floors, walls, and ceilings;

(ii) Closed, tight-fitting windows; and

(iii) Solid, self-closing, tight-fitting doors.

2. The requirements in paragraph 1 of this subsection does not apply if a food service establishment opens into a larger structure, such as a mall, airport, or office building, or into an attached structure, such as a porch, and the outer openings from the larger or attached structure are protected against the entry of insects and rodents.

3. Exterior doors used as exits need not be self-closing if they are:

(i) Solid and tight-fitting;

(ii) Designated for use only when an emergency exists, by the fire protection authority that has jurisdiction over the food establishment; and

(iii) Limited-use so they are not used for entrance or exit from the building for purposes other than the designated emergency exit use.

4. Except as specified in paragraphs 2 and 5 of this subsection, if the windows or doors of a food service establishment, or of a larger structure within which a food service establishment is located, are kept open for ventilation or other purposes or a temporary food service establishment is not provided with windows and doors as specified under paragraph 1 of this subsection, the openings shall be protected against the entry of insects and rodents by:

(i) 16 mesh to 1 inch (16 mesh to 25.4 mm) screens;

(ii) Properly designed and installed air curtains to control flying insects; or

(iii) Other effective means.

5. The requirement in paragraph 4 of this subsection does not apply if flying insects and other pests are absent due to the location of the establishment, the weather, or other limiting condition.

Observed raw fish being thawed in 3-compartment sink next to cooked sausage. 511-6-1.04(4)(u) - Food Display (P) (u) Food Display.

1. Except for nuts in the shell and whole, raw fruits and vegetables that are intended for hulling, peeling, or washing by the consumer before consumption, food on display shall be protected from contamination by the use of packaging; counter, service line, or salad bar food guards, display cases, or other effective means. P

2. Protective devices for counters, serving lines, salad bars and other similar food displays in food service establishments shall be designed and constructed so as to intercept contaminants which may be expelled from the customer's mouth or nose.

3. All food, whether on display, being prepared for service or placed for consumer self-service must be protected from contamination from consumers standing or sitting within eight feet of the food, except that table side finishing as approved by the Health Authority and hibachi grills will be allowed when food preparation is for immediate service.

Observed 3-compartment sink leaking water onto floor. 511-6-1.06(2)(r) - System Maintained in Good Repair (P, C) (r) System Maintained in Good Repair. A plumbing system shall be repaired according to law; P and maintained in good repair.

Observed ceiling tiles with large hole, water damage, and mold-like accumulation in storage closet. Also observed hole in ceiling above chest freezer, base boards in disrepair throughout kitchen, and floors in need of resealing in the main kitchen. 511-6-1.07(5)(a),(b) - Good Repair, physical facilities maintained; Cleaning, Frequency & Restrictions, cleaned often enough to keep them clean (C) (5) Maintenance and Operation.

(a) Good Repair. All physical facilities shall be maintained in good repair.

(b) Cleaning, Frequency and Restrictions.

1. The physical facilities shall be cleaned as often as necessary to keep them clean and by methods that prevent contamination of food products.

2. Except for cleaning that is necessary due to a spill or other accident, cleaning shall be done during periods when the least amount of food is exposed, such as after closing.

Observed no handwashing sign for employee handwashing in main kitchen. 511-6-1.07(3)(d) - Handwashing Signage (C) (d) Handwashing Signage. A sign or poster that notifies food employees to wash their hands shall be provided at all handwashing sinks used by food employees and shall be clearly visible to food employees.

Observed walk-in cooler door with excessive rusting and reach-in cooler door with gasket not connected. 511-6-1.05(6)(a) - Good Repair & Proper Adjustment (C) (6) Maintenance and Operation.

(a) Good Repair and Proper Adjustment.

1. Equipment shall be maintained in a state of repair and condition that meets the requirements specified under subsections (1) and (2)of this Rule.

2. Equipment components such as doors, seals, hinges, fasteners, and kick plates shall be kept intact, tight, and adjusted in accordance with manufacturer's specifications.

3. Cutting or piercing parts of can openers shall be kept sharp to minimize the creation of metal fragments that can contaminate food when the container is opened.

Observed several plates with chipping, container lids in disrepair, and exterior of mixing bowl with excessive rust accumulation. 511-6-1.05(2)(a) - Equipment and Utensils, constructed of durable materials (C) (2) Design and Construction.

(a) Equipment and Utensils. Equipment and utensils shall be designed and constructed to be durable and to retain their characteristic qualities under normal use conditions.

Observed debris accumulation and rusting on shelving throughout the main kitchen. 511-6-1.05(7)(d) - Nonfood-Contact Surfaces (C) (d) Nonfood-Contact Surfaces. Nonfood-contact surfaces of equipment shall be cleaned at a frequency necessary to preclude accumulation of soil residues.

Observed multiple TCS food items in pizza prep-top/reach-in cooler. above 41F. Manager threw away cheese and items that were within proper temperature range were placed on ice. 511-6-1.04(6)(f) - Time/Temperature Control for Safety; Cold Holding (P) (f) Time/Temperature Control for Safety Food, Hot and Cold Holding. Except during preparation, cooking, or cooling, or when time is used as the public health control, time/temperature control for safety food shall be maintained at 41°F (5°C) or below or 135°F (57°C) or above, except that roasts cooked to a temperature and for a time specified in subsection (5)(a)2 of this Rule and reheated using the same temperature and time conditions as cooking may be held at a temperature of 130°F (54°C) or above. P

Observed ice chute door with pink accumulation. 511-6-1.05(7)(b) - Food Contact Surfaces and Utensils - Cleaning Frequency (P, C) (b) Equipment Food-Contact Surfaces and Utensils.

1. Equipment food-contact surfaces and utensils shall be cleaned:

(i) Before each use with a different type of raw animal food such as beef, fish, lamb, pork, or poultry. It does not apply if the food-contact surface or utensil is in contact with a succession of different types of raw meat and raw poultry each requiring a higher cooking temperature as specified under DPH Rule 511-6-1.04(5)(a) than the previous type such as preparing raw pork followed by cutting raw poultry on the same cutting board; P

(ii) Each time there is a change from working with raw foods to working with ready-to-eat foods; P

(iii) Between uses with raw fruits and vegetables and with Time/Temperature Control for safety food; P

(iv) Before using or storing a food temperature measuring device; P and

(v) At any time during the operation when contamination may have occurred. P

2. Except as specified in paragraph 3 of this subsection, if used with time/temperature control for safety food, equipment food-contact surfaces and utensils shall be cleaned at least every 4 hours throughout the day. P

3. Surfaces of utensils and equipment contacting time/temperature control for safety food may be cleaned less frequently than every 4 hours if:

(i) In storage, containers of time/temperature control for safety food and their contents are maintained at temperatures specified under DPH Rule 511-6-1-.04 and the containers are cleaned when they are empty;

(ii) Utensils and equipment are used to prepare food in a refrigerated room or area that is maintained at one of the temperatures in the following chart and:

(I) The utensils and equipment are cleaned at the frequency in the following chart that corresponds to the temperature:

Temperature Cleaning Frequency

41ºF (5.0ºC) or less 24 hours

41ºF - 45ºF (>5.0ºC - 7.2ºC) 20 hours

45ºF - 50ºF (>7.2ºC - 10.0ºC) 16 hours

50ºF - 55ºF (>10.0ºC - 12.8ºC) 10 hours

and

(II) The cleaning frequency based on the ambient temperature of the refrigerated room or area is documented in the food service establishment.

(iii) Temperature measuring devices are maintained in contact with food, such as when left in a container of deli food or in a roast, held at temperatures specified under DPH Rule 511-6-1- .04;

(iv) Equipment is used for storage of packaged or unpackaged food, such as a reach-in refrigerator, and the equipment is cleaned at a frequency necessary to preclude accumulation of soil residues;

(v) The cleaning schedule is approved based on consideration of:

(I) Characteristics of the equipment and its use,

(II) The type of food involved,

(III) The amount of food residue accumulation, and

(IV) The temperature at which the food is maintained during the operation and the potential for the rapid and progressive multiplication of pathogenic or toxigenic microorganisms that are capable of causing foodborne disease; or

(vi) In-use utensils are intermittently stored in a container of water in which the water is maintained at 135ºF (57ºC) or more and the utensils and container are cleaned at least every 24 hours or at a frequency necessary to preclude accumulation of soil residues.

4. Dining counters and table-tops shall be cleaned and sanitized routinely after removing all soiled tableware and food trays shall be cleaned and sanitized after each use by one of the following methods:

(i) A two step method in which one cloth, rinsed in sanitizing solution is used to clean food debris from the surface and a second cloth in separate sanitizing solution is used to rinse;

(ii) Sanitizing solution is sprayed onto the surface and the surface is then wiped clean with a disposable towel;

(iii) If used for cleaning and sanitizing, single-use disposable sanitizer wipes shall be used in accordance with EPA-registered label use instructions; or

(iv) Other methods approved by the Health Authority.

(v) Food trays may be cleaned and sanitized the same as table ware.

5. Except when dry cleaning methods are used as specified under subsection (7)(e) of this Rule, surfaces of utensils and equipment contacting food that is not time/temperature control for safety food shall be cleaned:

(i) At any time when contamination may have occurred;

(ii) At least every 24 hours for iced tea dispensers including nozzles and consumer self-service utensils such as tongs, scoops, or ladles;

(iii) Before restocking consumer self-service equipment and utensils such as condiment dispensers and display containers; and

(iv) In equipment such as ice bins and beverage dispensing nozzles and enclosed components of equipment such as ice makers, cooking oil storage tanks and distribution lines, beverage and syrup dispensing lines or tubes, coffee bean grinders, and water vending equipment:

(I) At a frequency specified by the manufacturer; or

(II) Absent manufacturer specifications, at a frequency necessary to preclude accumulation of soil or mold.

Observed expired score posted.

Observed interior of walk-in cooler door rusting and metal curling at the bottom. 511-6-1.05(6)(a) - Good Repair & Proper Adjustment (C) (6) Maintenance and Operation.

(a) Good Repair and Proper Adjustment.

1. Equipment shall be maintained in a state of repair and condition that meets the requirements specified under subsections (1) and (2)of this Rule.

2. Equipment components such as doors, seals, hinges, fasteners, and kick plates shall be kept intact, tight, and adjusted in accordance with manufacturer's specifications.

3. Cutting or piercing parts of can openers shall be kept sharp to minimize the creation of metal fragments that can contaminate food when the container is opened.

Observed floor in main kitchen in need of resealing and ceiling tiles in women's restroom closet to back door with exposed foam. 511-6-1.07(5)(a),(b) - Good Repair, physical facilities maintained; Cleaning, Frequency & Restrictions, cleaned often enough to keep them clean (C) (5) Maintenance and Operation.

(a) Good Repair. All physical facilities shall be maintained in good repair.

(b) Cleaning, Frequency and Restrictions.

1. The physical facilities shall be cleaned as often as necessary to keep them clean and by methods that prevent contamination of food products.

2. Except for cleaning that is necessary due to a spill or other accident, cleaning shall be done during periods when the least amount of food is exposed, such as after closing.

3. If present, playground equipment and associated areas shall be maintained in a clean and sanitary condition. In addition, a cleaning and sanitizing plan along with cleaning and sanitizing records for playground equipment and associated areas shall be maintained within the food service establishment for review upon request by the Health Authority. Further, such cleaning and sanitizing plan for employees to follow in the event of encountering vomitus or fecal matter shall be included and submitted at the time of permit application as specified in DPH Rule 511-6-1-.02(1)(c). Pf

Observed ready-to-eat chicken utilized for as pizza topping stored above par cooked chicken and adjacent to raw chicken.

Observed cooling par cooked chicken being stored on 3-compartment sink uncovered.

Observed ice chute door with brown accumulation and drink dispenser nozzle at bar with black accumulation.

Observed hot water pressure low at hand sink next to 3-compartment sink.

Observed expired score posted.

Observed floors in need of reselling and repainting, and door frame at entrance of kitchen in disrepair.

Observed vents in food prep area with rust accumulation. Please clean and paint vents.

Observed multiple TCS food items in prep-top cooler adjacent to bar above 41F. PIC placed items on ice or into walk-in cooler.

Observed ice chute door of drink machine with pink accumulation. PIC cleaned and sanitized the ice chute.

Observed dish machine with chlorine sanitizer below 50ppm. Chlorine sanitizer must have a concentration of 50ppm-100ppm.

Observed food items store on sheet pan directly on floor in walk-in cooler. Food items must be stored 6 inches off the floor.

Observed wiping cloths stored in a quaternary ammonium sanitizing solution below 200 PPM. Employee changed out sanitizer.

Observed mold accumulation behind ice chute of drink machine. PIC cleaned and sanitized behind ice chute. Also observed shelving throughout main kitchen with rust and dust accumulation.

Observed ceiling tiles with damage in the kitchen prep area and missing in dry storage area. Also observed ceiling tiles with staining, dust, and debris accumulation in the kitchen and dry storage area.

Observed concrete floor in kitchen prep area in need of resealing/ repainting.

Observed light bulb out under grill hood.

Observed dishwashing machine sanitizer dispensing chlorine sanitizer of 10ppm. Chlorine sanitizer concentration must be at 50ppm-100ppm. Observed plates stored in a way that can causes contamination on the food contact surface area of the plates. Manager corrected on site by inverting the plates (COS).

Observed working chemical spray bottle without a common name label. Manager corrected on site by adding label to the chemical spray bottle (COS).

Observed chemical spray bottles stored to exposed napkins, silverware, and oil condiments by the bar area. Manager removed chemical spray bottles (COS).

Observed sanitizer buckets with chlorine solution above 200ppm. Chlorine sanitizing solution above 100ppm is considered toxic and must be between the range of 50ppm-100ppm. Manager corrected on site.

Observed chicken wings cooling at room temperature. Manager placed chickens in the walk-in cooler for proper cooling (COS).

Observed prep top cooler door in need of repair.

Observed shelves throughout the main kitchen with accumulated dust debris.

Observed cardboard box used as a ceiling tile. Ceiling tiles must be made of non-absorbent materials. Observed walls behind the three-compartment sink, dishwashing machine, and pizza oven in need of cleaning due to old grease, mold, and food debris. Observed dust accumulated on ceilings above prep tables in the kitchen. Observed doors in the main kitchen in need of repair.

6-2. Observed TCS food not marked with a date of preparation or date for disposal. The manager corrected during the inspection by marking product with preparation date.

15C. Observed accumulated old food debris on soiled side of drain boards.

17C. Observed ceiling tile in need of cleaning due to accumulated dust giving special attention to areas need the dish machine,

17d. Observed hood and filter system in need of cleaning due to accumulated dust and grease.