Premiere Lofts at Pinewood Forest

The vacuum line cover screws in and out as needed and does not meet the requirements of the code. The vacuum line shall be protected with a self-closing, self-latching fitting that complies with the current IAMPO SPS 4- Special Use Suction Fitting for Swimming Pools, Spas and Hot Tubs.

The letters on the depth marker do not meet minimum height requirement of 4". Depth markers number and letters shall be tile and four inches minimum in height. Numbers shall be of contrasting color to the background on which they are applied. Correct prior to permitting season 2028

There is a busted out depth marker tile. Replace the tiles for signage purposes and to prevent a hazard to the bather.

The wording for NO DIVING does not meet minimum height requirement of 4". The words "No Diving" and the universal international symbol for “NO DIVING” shall be permanently visible at the edge of the deck for water five feet in depth or less, placed only on the deck beside the depth markers, and shall conform to that outlined for depth markers. Correct prior to permitting 2028.

The two access doors from the clubhouse to the pool do not meet the requirements for the prevention of unauthorized access into the pool area. Prior to permitting for next season, the doors shall meet the requirements. The magnet on the back, right exterior gate does not engage, allowing the door to freely open. Access gates shall also comply with the requirements of this Rule and shall be equipped to accommodate a locking device. Barrier gates shall open away from the pool in facilities constructed after adoption of this chapter. Pedestrian access gates shall be self-closing and have a self-latching device. Gates other than pedestrian access gates shall have a self-latching device. Where the release mechanism of the self latching device is located less than fifty-four inches from the bottom of the gate, 1. The release mechanism shall be located on the pool side of the gate at least three inches below the top of the gate and 2. Any openings in the gate or barrier located within eighteen inches of the release mechanism shall be less than one-half inch. 3. Mechanisms controlled by an access card reader, key entry device or keypad shall be located on the outside of the access gate.

The emergency phone does not connect directly to 911 emergency operations. A third party entity answers the alert call. Prior to permitting next season, the emergency phone must contact local 911 emergency directly. n operable, hard-wired, conventional telephone line or continuous powered source, weatherproof emergency phone shall be permanently installed in a conspicuous location within the pool enclosure and must be readily available to bathers at all times. The emergency phone shall be capable of connecting to 911 and electronically transferring an automatic number identification and automatic locator identification of the pool emergency phone to the public safety answering point, if available. A 911 sign or the names and phone numbers of the nearest available police, fire, ambulance service or rescue unit shall be posted nearby.

There is no available documentation to verify a daily safety check is performed. A safety self-inspection shall be conducted daily by the trained operator or responsible person and documented on a log sheet.

The vacuum line cover screws in and out as needed and does not meet the requirements of the code. The vacuum line shall be protected with a self-closing, self-latching fitting that complies with the current IAMPO SPS 4- Special Use Suction Fitting for Swimming Pools, Spas and Hot Tubs.

The flow meter is not functioning properly. Flow can not be determined. Ensure the flow meter is functioning to monitor required flow. This must be corrected prior to permitting.

The depth markers on the pool deck do not have the "FT" in the minimum height. Depth markers number and letters shall be tile and four inches minimum in height. Numbers shall be of contrasting color to the background on which they are applied. Facility has to be in compliance before permitting season 2028.

There is a busted out depth marker tile. Replace the tiles for signage purposes and to prevent a hazard to the bather.

A weir is not present in each skimmer. Each skimmer shall have a weir that adjusts automatically to variations in water level over a minimum range of four inches.

The hours of operation and the bather load/peak occupancy is not posted. A sign shall be posted stating the hours of operation in clear view near the entrance and shall state the theoretical peak occupancy.

The wording for NO DIVING does not meet minimum height requirement of 4". The words "No Diving" and the universal international symbol for “NO DIVING” shall be permanently visible at the edge of the deck for water five feet in depth or less, placed only on the deck beside the depth markers, and shall conform to that outlined for depth markers.

The No lifeguard sign does not meet the requirements for letter height and wording. Where no lifeguard is on duty, a sign or signs shall be placed in clear view at or near the entrance to the pool and shall state in clearly legible letters at least four inches high “WARNING - NO LIFE GUARD ON DUTY and RISK OF DROWNING - SUPERVISE CHILDREN CLOSELY”.

The complete list of pool risks is not posted. See email for guidance.

Ensure the inspection is posted in public view. The operator shall receive a copy of the inspection and place it in a location protected from the weather and in public view as designated by the health authority.

The alkalinity does not meet minimum requirements of at least 60ppm. Correct alkalinity and then test pH to ensure it is adjusted correctly.

.4(9)(d):There are numerous large rocks inside the pool and there is broken glass on the deck of the pool. All surfaces that come in contact with the user shall be finished so that they do not constitute a cutting, pinching, puncturing or abrasion hazard under casual contact and intended use. All materials shall be maintained in accordance with manufacturer's instructions.

.11 (3)(e):The equalizer check valve and float valve assemblies are missing in each skimmer. Ensure all equipment is present related to the equalizer lines. Each skimmer shall be equipped with a trimmer valve capable of distributing the total flow between individual skimmers.

The two access doors from the clubhouse to the pool do not meet the requirements for the prevention of unauthorized access into the pool area. Prior to permitting for next season, the doors shall meet the requirements.

Access gates shall also comply with the requirements of this Rule and shall be equipped to accommodate a locking device. Barrier gates shall open away from the pool in facilities constructed after adoption of this chapter. Pedestrian access gates shall be self-closing and have a self-latching device. Gates other than pedestrian access gates shall have a self-latching device. Where the release mechanism of the self latching device is located less than fifty-four inches from the bottom of the gate, 1. The release mechanism shall be located on the pool side of the gate at least three inches below the top of the gate and 2. Any openings in the gate or barrier located within eighteen inches of the release mechanism shall be less than one-half inch. 3. Mechanisms controlled by an access card reader, key entry device or keypad shall be located on the outside of the access gate.

The emergency phone does not connect directly to 911 emergency operations. A third party entity answers the alert call. Prior to permitting next season, the emergency phone must contact local 911 emergency directly. n operable, hard-wired, conventional telephone line or continuous powered source, weatherproof emergency phone shall be permanently installed in a conspicuous location within the pool enclosure and must be readily available to bathers at all times. The emergency phone shall be capable of connecting to 911 and electronically transferring an automatic number identification and automatic locator identification of the pool emergency phone to the public safety answering point, if available. A 911 sign or the names and phone numbers of the nearest available police, fire, ambulance service or rescue unit shall be posted nearby.

The flow meter is not functioning properly. Flow can not be determined. Ensure the flow meter is functioning to monitor required flow.

The depth markers on the pool deck do not have the "FT" in the minimum height. Depth markers number and letters shall be tile and four inches minimum in height. Numbers shall be of contrasting color to the background on which they are applied

The equalizer check valve and float valve assemblies are missing in each skimmer. Ensure all equipment is present related to the equalizer lines.

The wording for NO DIVING does not meet minimum height requirement of 4". The words "No Diving" and the universal international symbol for “NO DIVING” shall be permanently visible at the edge of the deck for water five feet in depth or less, placed only on the deck beside the depth markers, and shall conform to that outlined for depth markers.

The No lifeguard sign does not meet the requirements for letter height and wording. Where no lifeguard is on duty, a sign or signs shall be placed in clear view at or near the entrance to the pool and shall state in clearly legible letters at least four inches high “WARNING - NO LIFE GUARD ON DUTY and RISK OF DROWNING - SUPERVISE CHILDREN CLOSELY”.

The complete list of pool risks is not posted. See email for guidance.

The hours of operation and the bather load/peak occupancy is not posted. A sign shall be posted stating the hours of operation in clear view near the entrance and shall state the theoretical peak occupancy.