Jun 11, 2026
Routine
4-2B - food-contact surfaces: cleaned & sanitized
Observed dish washing machine with a final sanitizing temperature of 154F and a wash cycle temperature of 160F 511-6-1.05(6)(l) - Mechanical Warewashing, Hot Water Sanitization Temperatures(P) (l) Mechanical Warewashing Equipment, Hot Water Sanitization Temperatures.
- Except as specified in paragraph 2 of this subsection, in a mechanical operation, the temperature of the fresh hot water sanitizing rinse as it enters the manifold may not be more than 194ºF (90ºC), or less than: Pf
(i) For a stationary rack, single temperature machine, 165ºF (74ºC); Pf or
(ii) For all other machines, 180ºF (82ºC). Pf
- The maximum temperatures specified under paragraph 1 of this subsection, do not apply to the high pressure and temperature systems with wand-type, hand-held, spraying devices used for the in-place cleaning and sanitizing of equipment such as meat saws. Dish Machine final sanitizing temperature can not exceed 194 Degrees Fahrenheit.
Note: The Manager will call Ecolab to come to repair the dish washing machine. Faacility will use the (3) Compartment sink to wash rinse and sanitize all equipment.
11A - proper cooling methods used: adequate equipment for temperature control
Regulation: 511-6-1.04(6)(e) - cooling methods (pf, c)
Cut lettuce was observed cooling in the walk in cooler covered with a Lid. 511-6-1.04(6)(e) - Cooling Methods (Pf, C) (e) Cooling Methods.
- Cooling shall be accomplished in accordance with the time and temperature criteria specified under DPH Rule 511-6-1-.04(6)(d) by using one or more of the following methods depending on the type of food being cooled:
(i) Placing the food in shallow pans; Pf
(ii) Separating the food into smaller or thinner portions; Pf
(iii) Using rapid cooling equipment; Pf
(iv) Stirring the food in a container placed in an ice water bath; Pf
(v) Using containers that facilitate heat transfer; Pf. Note: Lettuce was uncovered during the inspection.